M-Audio MobilePre USB Manuel du propriétaire télécharger pdf (Page 2)

Quick Start Guide

This Quick Start Guide is a very short, step-by-step guide to getting you

started right away at using your new M-Audio MobilePre USB.

Step 1: Run the Installer

Insert the included Install CD-ROM into your CD or DVD drive and

double-click the install program. Follow the onscreen instructions.

Depending on your operating system, you may be prompted to restart

your computer at the end of the installation procedure. If the installer

instructs you to restart, you must restart your computer.

Step 2: Connect the Audio Cables

A typical system using the MobilePre USB has its two outputs connected

to a mixer or a pair of powered speakers. Connect a Microphone to the

Channel 1 XLR Input on the rear panel of the MobilePre USB.

Step 3: Connect the USB Cable

Connect the supplied USB cable to an open USB port on your computer.

Step 4:Test your Installation

Set your computer’s output to play out of the MobilePre USB and play and

audio file to test your connections. Launch an audio recording program,

arm one of the channels,and try recording some audio from a microphone

connected to the MobilePre USB’s inputs.

Still need more info? The following pages will walk you through the setup

and use of your MobilePre USB, in much greater detail.

1 2 3 4 5 6 7 ... 29 30

Pas de commentaire

M-Audio MobilePre USB Manuel du propriétaire Page 2