M-Audio Evolution MK-461C Spécifications Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 56
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
24
UC-33e
Requirements/Setting up:
You must connect the UC-33e via USB or two-way MIDI.
Reason will automatically find the UC-33e if you click the Auto-de-
tect button on the Control Surfaces and Keyboards page in the
Preferences. If you add the UC-33e manually, you need to specify
both MIDI Input and Output ports.
When you add the UC-33e (manually or by using auto-detect), Rea-
son will upload custom settings, overwriting preset 2. After this is
done, you need to select preset 2 on the UC-33e.
About the default mapping:
The UC-33e has the same mapping as the UC-33 (original version). See above.
X-Session
Requirements/Setting up:
Reason will automatically find the X-Session if you click the Auto-
detect button on the Control Surfaces and Keyboards page in the
Preferences.
To use the X-Session with Reason, you need to select preset 6 and
make sure this isn't changed from the factory settings.
If you have connected the keyboard via USB, Reason will restore
preset 6 to factory settings for you - however, note that you need to
select preset 6 manually after this is done.
You can also restore your X-Session manually by holding down the
+ and - buttons when you turn the keyboard on - note that this re-
stores all presets to factory settings, deleting any changes you have
made.
About the default mapping:
D The X-fader is used for Master Level control.
D On the keypad, buttons 4 and 7 are used for Target Previous/Next
Track.
D Buttons 6 and 9 are used for Select Previous/Next Patch, where ap-
plicable.
D For effect devices, button 0 controls the Bypass/On/Off state.
D When controlling devices with many parameters, keyboard shortcut
variations are used.
D Mixer 14:2
There are six keyboard shortcut variations. In variations 1-2 knobs 1-14 con-
trol the channel 1-14 levels and pans respectively. In variation 3, knobs 1-7
control the channel 1-7 levels and knobs 9-15 control the channel 1-7 pans.
In variation 4, knobs 1-7 control the channel 8-14 levels and knobs 9-15 con-
trol the channel 8-14 pans. In the two last variations knobs 1-14 control the
Aux 1 and 2 sends respectively. Knob 15 controls the Aux 1 and 2 returns.
D Mixer 6:2
There are two variations. In the two variations knobs 9-14 control pans and
Aux sends respectively. Knobs 1-6 control the levels, knob 8 controls Aux Re-
turn level and keypad 1 controls Aux Pre/Post in both variations.
D Thor
There are five keyboard shortcut variations: Filters, Osc & Amp, Modulation,
Sequencer 1 and Sequencer 2. Depending on selected variation, the knobs
are mapped to the corresponding sections in Thor. Keypads 1-2 control the
front panel buttons 1-2. Keypad 3 controls Portamento Mode, keypad 4 con-
trols Keyboard Mode, keypad 5 controls Global Env Gate Trig, keypad 7 con-
trols step sequencer run and keypad 8 controls Chorus on/off. Knobs 1 and 2
control Rotaries 1 and 2 on the Thor panel.
D Subtractor
There are two keyboard shortcut variations: Filters & Env and Osc. Depending
on selected variation, the knobs are mapped to the corresponding sections in
the Subtractor. Keypads 5 and 8 control the LFO1 and 2 destinations respec-
tively. Keypad 0 controls the Mod Env destination.
D Malström
There are two keyboard shortcut variations: Oscillators and Filter & Mod. De-
pending on selected variation, the knobs are mapped to the corresponding
sections in Malström. Keypads 8 and 0 control the Modulator 1 and 2 on/off
respectively. Keypad 1-2 control Osc A & B on/off and Filter A & B on/off in
the respective variations.
D Redrum
There are two keyboard shortcut variations: Level & Pan 1-8 and Pitch. In the
Level & Pan variation knobs 1-8 control the channel 1-8 levels and knobs 9-
16 control the channel 1-8 pans. In the second variation knobs 1-10 control
the channel 1-10 pitches.
D BV-512 Vocoder
There are three keyboard shortcut variations: Basic, Band 1-16 and Band 17-
32. In the basic variation the knobs control the panel parameters. In variation
2-3 the knobs control the band levels. Keypad 0-2 control switch parameters.
D Matrix
The keypads control the pattern and bank select functions.
D ReGroove
Knobs 1-4 control the A1-A4 Groove amount. Knobs 5-8 control the A1-A4
Shuffle and knobs 9-12 control the A1-A4 Slide.
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Commentaires sur ces manuels

Pas de commentaire