M-Audio Evolution MK-461C Spécifications Page 37

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 56
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 36
37
Oxygen 8 and Oxygen 8 v2
Requirements/Setting up:
There are two codecs (Remote drivers) for the Oxygen 8: "older model" and
"newer model". Here's why: Reason uses factory preset 1 in the Oxygen 8, but we
have found that there are two different models of the Oxygen 8, with different
factory preset settings. So, which codec to choose depends on the model of your
Oxygen 8. Here's what you should do:
1. Connect the Oxygen 8 via USB or MIDI.
2. Select preset 1 and make sure this isn't changed from the factory
settings. For Oxygen 8 v2 select preset 10 instead.
3. If needed, you can restore all presets to factory settings by holding
down the MIDI/Select button while you turn on the Oxygen 8 (note
that this restores all presets, removing any changes you have
made!).
4. Add the keyboard as an "Oxygen 8 (older model)" and check
whether it works OK.
For a quick check, set master keyboard input to a Subtractor device and move
knob 1 - this should control the frequency slider of filter 1.
5. If this doesn't work, delete the Oxygen 8 from the control surfaces
list and add it again, this time as an "Oxygen 8 (newer model)".
! The two codecs are identical in regards to the functions and map-
ping.
Below, the factory settings for the knobs in preset 1 are listed. You can use these
lists to check whether your Oxygen 8 is an "older" or "newer" model. You can also
use the lists to reprogram the knobs manually (if you don't want to restore all pre-
sets to factory defaults):
About the default mapping:
D Note that the Data Entry Fader controls master level on many de-
vices.
D Keyboard shortcut variations are used for devices with many pa-
rameters.
D Mixer 14:2
There are eight keyboard shortcut variations, for controlling channels 1-7 or
8-14, respectively. The knobs control channel levels, pans, Aux1and Aux2.
Knob 8 controls master level, Aux 1 or 2 Return levels depending on selected
variation.
D Mixer 6:2
There are three keyboard shortcut variations: Levels, Pans and Sends. Knob 8
controls Master Level and knob 7 controls Aux Return in all variations.
D Subtractor
There are three variations: Filter & LFO, Env and Osc. The knobs control pa-
rameters in the respective parameter groups for each of the variations.
D Thor
There are six keyboard shortcut variations: Globals, Osc 1&2, Filter 1, LFO &
Mod, Amp and Delay & Chorus. The knobs control parameters in the respec-
tive variations. Knob 8 controls Master Level in all variations. In the Globals
variation knobs 6-7 control Rotaries 1 and 2.
D Malström
There are three variations: Filter, Osc A and Osc B. The knobs control param-
eters in the respective parameter groups for each of the variations.
D NN-19
There are two variations: Filter and Env & Mod. The buttons and knobs control
parameters in the respective parameter groups for each of the variations.
D Dr. REX
There are two variations: Filter & Osc and Env. The buttons and knobs control
parameters in the respective parameter groups for each of the variations.
D Redrum
There are three keyboard shortcut variations, determining the function of the
knobs. The knobs control Level, Pan or Pitch for channels 1-8 depending on
selected variation.
D MClass Equalizer
There are two variations: Built-in 1 (Low and Para 1) and Built-in 2 (Para 2
and Hi). The knobs control parameters in the respective parameter groups for
each of the variations.
D Scream 4 Distortion
There are two keyboard shortcut variations: Damage & Cut and Body. The
knobs control parameters in the respective group for each of the variations.
|
Oxygen 8
|
older model
|
newer model
Knob 1 MIDI CC 10 MIDI CC 74
Knob 2 MIDI CC 11 MIDI CC 71
Knob 3 MIDI CC 12 MIDI CC 81
Knob 4 MIDI CC 13 MIDI CC 91
Knob 5 MIDI CC 14 MIDI CC 16
Knob 6 MIDI CC 15 MIDI CC 80
Knob 7 MIDI CC 16 MIDI CC 19
Knob 8 MIDI CC 17 MIDI CC 02
Vue de la page 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Commentaires sur ces manuels

Pas de commentaire