M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manuel d'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 53
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
Hardware options for Pro Tools LE and M-Powered systems
with control room Level, Mono, and Mute switches. A Headphone output is
also provided with its own separate level control.
Digi 003 Family
There are three 003 family interfaces including the Digi 003 Integrated Control
Surface that replaced the Digi 002, the Digi 003R that replaced the Digi 002R,
and the Digi 003 +.
Each 003 family interface has unique features. However, all 003 family units
can handle up to 18 simultaneous channels of audio I/O at up to 24-bit/96 kHz
resolution and use FireWire to communicate with the host computer.
Each has eight individual analogue audio inputs and eight individual analogue
audio outputs, plus Main and Alternate Monitor Output pairs (+4 dBU)
controlled by a single level control. These two pairs of monitor outputs mirror
individual outputs 1–2 to allow connection to a monitoring system (such as a
stereo power amp, powered speakers, or another stereo destination).
An Aux Input pair (+4 dBu) is provided for direct monitoring of tape or CD
input sources.
The Monitor section has a Mute switch and additional switches for routing
input and output signals.
There are two 1/4-inch stereo headphone outputs with level controls.
Headphone 1 monitors Main Outputs 1–2. Headphone 2 can also monitor
Main Outputs 1–2 or can be switched to monitor Outputs 3–4 to provide a
separate cue mix.
Optical I/O connectors can be used for eight channels of Optical (ADAT) I/O
(supporting up to 48 kHz) or for two channels of Optical S/PDIF I/O. RCA
connectors are also provided for two channels of S/PDIF digital I/O supporting
up to 24-bit, 96 kHz audio. Word Clock In and Out ports can receive or send
1×Word clock.
There is also a Footswitch jack for starting and stopping playback or punching
in/out while recording.
Digi 003 – Integrated Control Surface
The Digi 003 is an integrated control surface for Pro Tools LE (or Pro Tools 9)
that is rugged enough to take out on the road’ or use in the studio.
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 52 53

Commentaires sur ces manuels

Pas de commentaire